Introducing
the Tri-Band 200mW Phonejammer the most sophisticated Digital Cellular Mobile Phone
Jammer, a device to help you keep away from noise or disturbance of cellular
phone calls.
To
keep you away from noise or disturbance of unexpected cellular phone calls
or text messages (SMS)..
To paralyze cellular phone communication links within a effective area.
No transmissions or receptions of cellular phone calls in coverage area.
All specified frequency bands will be paralyzed simultaneously.
The
coverage area is a sphere area with its effective distance as a radius.
For use at meeting rooms, conference rooms, museums, galleries, theatres,
concert halls, churches, temples, restaurants, classrooms, training centers,
factories, banks, trains, buses etc. For some locations of special purpose
such as hospital, gas station, etc. care should be taken operating this
device near electronic equipment.
Easy
to install and operate. No adjustment needed.
If jamming is low, please change the installation location or position or
check if any cellular control stations or repeaters are installed nearby.
Jamming ranges may be lower through walls.
AC
input
100V
~ 240V AC
DC
output
12V,
1000mA
Power
output (Avg.)
23dB,
200mW per band
Effective
blocking area
up
to 20 metre diametre of jamming
Effective
cellular system
AMPS,
CDMA, TDMA, GSM, PCS, DCS
Dimensions
100mm(W)
* 100mm(L) * 30mm(H)
Weight
300g including power supply
The
jamming ranges are influenced by the location of the cell base station and
the obstacles between cell base station & cellular jammer.
It means that in normal condition if the distance is far from cell base to
cellular Jammer, it will have good jamming ranges. Likewise, if there is an
obstacles between cell base station & cellular phone, it also has good
jamming ranges.
a)
The rear of the jammer has a keyhole fixing facility to enable convenient wall
placement.
b) The jammer can be placed in any position, vertical, horizontal etc.
c) The jammer should be installed in a well ventilated area.
d) In considering where you are going to place your jammer, be aware that obstructions
such as steel and concrete will hamper or even prevent effectiveness within
the 'shadow' of the obstruction.
e) Connect the DC plug of the adapter to the input socket on the side of the
jammer.
f) Connect the AC adapter to mains power. Turn on the power switch on the jammer
to activate it. Your unit is operating when the green LED is illuminated.
g) To turn off your jammer, turn off the power switch on the jammer.
a) With regards placing the jammer near sensitive or vital electronic
equipment, a competent engineer or technician with knowledge of the equipment
should be consulted.
b) When operating any cellular phone jammer, the user should be aware that emergency
communications can also be blocked. It is good practice to display a sign such
as "Doctors please note that cellular phone reception is poor in this building"
when the jammer is being used in a public place.
Purchase
200mW Tri-Band Phonejammer
$149
(takes
8 AA type batteries)
(plugs
into the cigarette lighter socket)
If you prefer to pay by ,please
click here!
* you may pay in any currency you wish by clicking the add to
cart buttons
- shipping the next day.
(takes
8 AA type batteries)
(plugs
into the cigarette lighter socket)
If you prefer to pay by 
,please
click here!
